• Our goal is simple: we want to help you keep healthy ponds
  • Our proven track record speaks for itself
  • At Ultra Zap we aim to offer you exciting and hassle free pond maintenance

UV CLARIFICATION PRODUCTS

In order to maintain a clear pond you need to match your UV to your pond size with the correct size pump to gain maximum efficiency at preventing algae growth and green water.

CLARIFICATION

POND

PROFESSIONAL

Reducing the growth rate of algae by use of UV light.

The pond range is used to inhibit the reproduction of algae in a pond,

The professional range is used to sterilize water by killing harmful bacteria and viruses.

AQUARIUM

STAINLESS STEEL

MAINTENANCE

Marine tanks use professional range of UV's to keep away and kill white spot and other water borne diseases harmful to fish.

We manufacture stainless steel UV's for the potable water treatment plant manufacturers. Also use on irrigation systems to kill E-Coli before irrigating crops.

All spares and parts for UltraZap UV's are locally manufactured and readily available.

POND RANGE

A pond with clear water is an attractive feature in your garden, which brings many hours of enjoyment and relaxation.  A green pond is unappealing to look at and makes it difficult to determine whether your fish have disease or have injured themselves.  Algae also poses a threat as it starves your Koi of the essential oxygen they require.

 

An Ultra Zap pond UV will eradicate free floating algae and maintain a clear pond throughout the year.  The UV works by exposing the photo tropic micro-organisms i.e.: free floating single celled algae to dose of UV radiation.  This destroys and prevents the regrowth of the algae. Ultra Zap UV’s have no side effects on the inhabitants of your pond and its environment.

POND

RANGE

Choice of Unit

 

We manufacture four UV lights 8,15,30 and 55 watt.  The table below provides a guide to which UV you should be using in your pond.  The stocking rate of your pond should be taken into account when making your decision which UV light to purchase.  A bank of UV’s either in series or parallel can be installed on larger ponds.

 

UV size

8 watt

15 watt

30 watt

55 watt

Pond Capacity

 6 000 litres

15 000 litres

30 000 litres

50 000 litres

Max flow per minute

40 l t/ pm

60 lt / pm

140 lt / pm

300 lt / pm

8, 15, 30 and 55 Watt UV's

8, 15, 30 and 55 Watt UV Electrics

UVC Lamps

UV Sterilizer Parts

TO TOP

PROFESSIONAL RANGE

This range is mainly for sterilizing water, killing bacteria and viruses

PROFESSIONAL

RANGE

The professional range is used for aquarium, marine, salt water applications. It sterilizes water killing bacteria and viruses.

8, 15, 30 and 55 watt UV Professional Range

8, 15, 30 and 55 watt UV Professional Range Electrics

Quartz Sleeves

TUBE MAINTENANCE

STAINLESS STEEL RANGE

STAINLESS

STEEL

RANGE

This range is more durable, used in bottling plants and on irrigation systems. The stainless steel  is more sterile and there is no glue to contaminate the water.  The stainless steel range gets a high quality Quartz sleeve that is mounted inside the unit. This Quartz sleeve isolates the lamp form the water, allowing the lamp to reach optimum operating temperature.

30, 55 watt Stainless Steel  UV Sterilizer

TUBE MAINTENANCE

MAINTENANCE

MAINTENANCE

We at Ultra Zap aim to offer you the client all the resources you need to ensure your hobby of  Koi keeping, is exciting and hassle free.

 

Ultra Zap has a “seasoned” and imaginative team. Since 1990, when Mike and Alan started trading from their small ZoZo hut, they have helped clients grow their passion of Koi keeping by supplying high quality products. With the addition of Keelin and Garth we have a well-rounded enthusiastic team.  Though our methods are complex, our goal is simple: we want to help you keep healthy ponds.

 

Our proven track record speaks for itself.  A hobbyist knows that in order to maintain a pond with a healthy environment and clear water for your fish, Ultra Zap products should be your first choice.

 

We pride ourselves that we are always willing to expand our range of equipment, further more fabricating many “one-off’s” for our valued clients.

 

Our appreciation goes out to our loyal clients and with who’s support have helped us grow from strength to strength and it is our aim to continue growing our recognized brand within the industry.

 

8, 15, 30 and 55 Watt UV Electrics

8, 15, 30 and 55 watt UV Professional Range Electrics

8, 15, 30 and 55 Watt UV-C Lamps

UV Sterilizer parts

Quartz Sleeves

TUBE MAINTENANCE

Replacing the tube in units with a Quartz sleeve

 

  • Disconnect the unit from the power supply, remove clear end caps and gently pull the electrical connectors off the ends of the tube.
  • Remove the tube from the Quartz sleeve.
  • To install the new tube just reverse the above procedure.
  • Removing the Quartz sleeve.
  • The quartz sleeve should be inspected every two to three months as dirt build up or calcification can occur. This will affect the efficiency of the U.V. unit.
  • Follow the above steps to remove the tube.
  • Unscrew the blue nuts and remove the O-rings.
  • Gently remove the Quartz sleeve and inspect.
  • If the Quartz sleeve needs cleaning use soapy water or a plastic kettle de-scaler.
  • Dry the quartz sleeve and re-install sleeve and tube.
  • Do not over tighten blue nuts
  • Check for leaks before turning the U.V. power on.

 

Safety

 

U.V. light can be harmful to your eyes or skin. NEVER operate a tube outside the unit. A blue glow will be seen through the clear end caps and the will confirm the tube is on, the U.V. content of this light is not harmful and the unit is completely safe in normal use.

 

 

Installing the Quartz sleeve and tube on a Professional UV

Follow the below steps to install the quartz sleeve and tube

  • Unscrew the blue nuts and remove the O-rings
  • Gently insert the quartz sleeve into the UV unit.
  • Fit the o-rings to the outside of each end of the quartz sleeve
  • Gently insert the tube inside the quartz sleeve
  • Screw the blue nuts onto the ends until it fits snug onto the o-ring whilst ensuring not to over tighten the quartz sleeve.
  • Connect the tube connectors to the ends of the tube and fit the clear PVC covers onto to blue nuts.
  • Replacing the tube in units with a Quartz sleeve.
  • Disconnect the unit from the power supply, remove clear end caps and gently pull the electrical connectors off the ends of the tube.
  • Remove the tube from the Quartz sleeve.
  • To install the new tube just reverse the above procedure

 

Safety

 

U.V. light can be harmful to your eyes or skin. NEVER operate a tube outside the unit. A blue glow will be seen through the clear end caps and the will confirm the tube is on, the U.V. content of this light is not harmful and the unit is completely safe in normal use.

 

Installing UV sterilisers to a manifold

 

  • Follow the below steps to install the UV’s to a manifold.
  • On a 4 way manifold you will need 2 manifolds and 4 UV’s
  • Line the 4 UV’s up next to each other and place a manifold at each end.
  • Insure that the O-rings are in place inside the half unions on each manifold
  • Once certain that none are missing begin fitting each manifold to the respective end of the UV’s
  • Effectively you will now have 1 inlet and 1 outlet with the four UV’s in between
  • Please note that the complete unit must be installed with the lids of the electrical boxes facing skywards.
  • For 55W pond UV’s the effective maximum flow rate is 1200L/min
  • For 55W professional UV’s the effective maximum flow rate is 600L/min

 

Safety

 

U.V. light can be harmful to your eyes or skin. NEVER operate a tube outside the unit. A blue glow will be seen through the clear end caps and the will confirm the tube is on, the U.V. content of this light is not harmful and the unit is completely safe in normal use.

 

 

Installing the tube on a Pond range UV

 

Follow the below steps to install the tube

  • Unscrew the blue nuts and remove the O-rings
  • Gently insert the tube into the UV unit.
  • Fit the o-rings to the outside of each end of the tube.
  • Screw the blue nuts onto the ends until it fits snug onto the o-ring whilst ensuring not to over tighten the tube.
  • Connect the tube connectors to the ends of the tube and fit the clear PVC covers onto to blue nuts.

 

Replacing the tube after use

 

  • Disconnect the unit from the power supply
  • Remove the UV from the system / manifold and drain all the water
  • Remove the clear end caps and gently pull the electrical connectors off the ends of the tube.
  • Unscrew the blue nuts and remove the o’rings
  • Gently remove the tube from the Unit aand wipe any debris from the ends of the Unit.
  • Gently insert the new tube into the unit and re-fit the o-rings or fit new o-rings if perished
  • Screw the blue nuts back on ensuring a snug fit onto the o-rings without over tightening.
  • Fit the tube connectors to the ends of th tube and cover with the clear PVC caps
  • Re-install the UV to the system and check for leaks and tighten the blue nuts where necessary.

 

 

ULTRAZAP EXCELLENCE

WITH OUR CONSIDERABLE EXPERIENCE AND KNOWLEDGE IN A VARIETY OF PRODUCTS, ULTRAZAP WILL DELIVER.

WE LOVE WHAT WE DO!

CONTACT US

LET'S TALK ABOUT IT

Contact us for more information on products and your nearest Koi dealer, Pet Shop or Landscaper

Submitting Form...

The server encountered an error.

Form received.

© 2017 | UltraZap

2017 | Website designed by SmishyFish

Our Promise